radial element

Finite element analysis of rolling contact characteristics for radial tire with grooved tread patterns

有花纹的载重子午胎滚动接地性能有限元分析

Static Finite Element Analysis for Effect of Belt Angle on Radial Tire with Complex Tread Patterns

帘线角对子午线轮胎力学性能的影响&基于含复杂花纹的轮胎有限元静力分析研究

Three dimensional finite element analysis of radial tire rolling resistance is carried out with MSC. MARC software. Tire core, thread ply and tire bead are simulated with the rebar membrane element and the rebar solid element, and rubber is described with Yeoh material mode.

MARC软件对子午线轮胎的滚动阻力进行了三维有限元分析计算，对轮胎的胎体、带束层、胎圈等部位采用了rebar膜单元以及rebar实体单元进行模拟，采用Yeoh材料模式描述橡胶材料。

No significant differences in tangential and radial width of cambial fusiform cell, length of vessel element, ratio of fiber and ray tissue were found among different stages.

结果表明，形成层纺锤形细胞的径向和弦向宽度在活动期不同阶段差异不显著，而纤维长度、纤维宽度、壁腔比、微纤丝角、导管分布频率和胞壁率差异极显著；

In the radial direction of the ingot , the alloy element distribution is very uniform.

在径向上,铸锭的元素分布均匀.

On the Design and Calculation of Ball Surface Hydrostatic Bearings Finite Element Method for Radial Deformations of Tilting Pad Journal Bearings

液体球面静压轴承设计计算研究径向可倾瓦轴承表面法向变形的有限元分析

The 3D nonlinear finite element analysis ( FEA) and experiments are performed on 195/ 60R14 radial-ply car tire.

对子午线轮胎195/60R14进行了三维非线性有限元分析及试验研究。

This paper tries to improve three-dimensional fine mesh finite element analysis of radial tire with combined pattern. 1.

本文试图完善组合花纹子午线轮胎的三维精细网格有限元分析。

Using the Non-linear analysis technology of ANSYS software, the three-dimension finite element model of radial tyre is built with three-dimension volume element, layer element and contacting element.

采用ANSYS软件非线性分析技术，通过三维体单元、层单元和接触单元，建立了60系列的R15型子午线轮胎的三维有限元模型。

A Study of Computer Simulation of Radial Keratotomy Using Finite Element Method

放射状角膜切开术有限元法计算机数值模拟的研究